Consolidated Statutes and Regulations Consolidated Statutes Consolidated Regulations Annual Statutes and Regulations Annual Statutes Annual Regulations Additional information Québec Official Publisher What’s new? Information note Policy of the Minister of Justice Laws: Amendments Laws: Provisions not in force Laws: Provisions brought into force Annual Statutes: PDF versions since 1996 Regulations: Amendments Annual Regulations: PDF versions since 1996 Court Decisions

C-24.2, r. 25.1 - Flashing Green Light Regulation

Section 6
Disposition versions

Full text
6. All flashing green lights must meet one of the following criteria:
(1)  be composed of one or more light emitting diode (LED) modules with a flash rate between 1 Hz and 4 Hz; or
(2)  comply with SAE Standard J845 dated February 2019 or SAE Standard J595 dated August 2021, or subsequent versions published by SAE International.
O.C. 85-2021, s. 6; O.C. 1696-2023, s. 7.
6. A flashing green light must be composed of one or more light emitting diode (LED) modules with a flash rate between 1 Hz and 4 Hz that complies with SAE Standard J845 dated February 2019 or a subsequent version published by the Society of Automotive Engineers.
The light must be equipped with a light-shield that reduces the glare affecting the driver due to the reflection of the light. Its maximum size, excluding the attachment system, must be 260 mm wide, 76 mm high and 185 mm deep.
O.C. 85-2021, s. 6.
In force: 2021-04-01
6. A flashing green light must be composed of one or more light emitting diode (LED) modules with a flash rate between 1 Hz and 4 Hz that complies with SAE Standard J845 dated February 2019 or a subsequent version published by the Society of Automotive Engineers.
The light must be equipped with a light-shield that reduces the glare affecting the driver due to the reflection of the light. Its maximum size, excluding the attachment system, must be 260 mm wide, 76 mm high and 185 mm deep.
O.C. 85-2021, s. 6.
© Gouvernement du Québec